PTFE Granular Molding Powder

Everflon™ PTFE (polytetrafluoroethylene) granular fluoropolymers are ideal for compression molding a wide variety of components and shapes; such as rods, tubes and sheets. Products fabricated from genuine

Everflon™ PTFE are unaffected by most chemicals and feature superior electrical, low friction and mechanical properties.Products manufactured with genuine Teflon™ PTFE are rated for continuous service at 260°C (500°F).

Everflon™ PTFE granular fluoropolymer resins are considered non-melts and are generally converted to finished articles in a three step process.

1) The resin is compression molded into a shape form (rod, tube, sheet).

2) The shape, once removed from the mold, is then sintered above its melting point to form a solid PTFE billet.

3) The solid PTFE billet is then machined into the finished article.

Everflon™ PTFE granular fluoropolymers are also available in chemically modified grades (+). The modified Everflon™+  materials deliver valuable additional capabilities while retaining the exceptional chemical, thermal, and low-friction properties of conventional Everflon™ PTFE fluoropolymer resins.Specifically, Everflon™+ granular fluoropolymers exhibit enhanced permeation resistance, a smoother less porous surface finish, improved bond strength and weldability, and improved dielectric breakdown strength.

ApplicationsSeals,

valve seats, gaskets, tank lining, fluid handling components and other end use components requiring a high performance fluoropolymer material.